All Categories
EN

BLOG

Home > BLOG > What chemical pump is suitable for hydrogen peroxide?

What chemical pump is suitable for hydrogen peroxide?

September 21,2022

Hydrogen peroxide is also known as hydrogen peroxide. The concentration specifications of general industrial hydrogen peroxide are above 27.5%, 30%, 35%, 50%, and 70%. Industrial hydrogen peroxide can be used in the following aspects: in chemical synthesis, as initiators, foaming agents, plasticizers, and main raw materials for peroxide series products; in papermaking, it is mainly used for pulp bleaching; In the textile industry, cloth bleaching; in the environmental protection industry, sewage treatment. The viscosity is slightly higher than that of water, and the chemical properties are unstable. Generally, it is stored in the form of a 30% or 60% aqueous solution.

In chemical projects, the reasonable selection of pumps is of great significance to the transportation of materials and the stability and reliability of long-term operation of the device.The following Hebang analyzes according to different usage scenarios.

So what chemical pump is suitable for the extraction of hydrogen peroxide?

1. The hydrogen peroxide is transported and lifted: Self-priming pump.

wps1

It has strong acid and alkali corrosion resistance and adopts self-cooling design without external cooling. Strong self-priming, and a check valve design to prevent the backflow of liquid in the pump.

Fluoroplastic Self-priming Pump

Flow rate :110m3 / h

Head :up to 70m

Voltage :380V/50HZ; 415V/50HZ, according to different country voltage

Temperature:-20 °C to ~80°C

2. Hydrogen peroxide for unloading and dosing: suitable for explosion-proof magnetic pump.

wps2

It has the characteristics of magnetic drive, full sealing, no leakage and corrosion resistance.

Proof Fluorine-lined plastic magnetic centrifugal pump for acid

Flow:7 to 120m3/hr

Head:22 to 80m

Pressure:1.6MPa

Temperature:-20 °C to~ +100 °C

3. Quantitative dosing of hydrogen peroxide: diaphragm metering pump.

It can achieve 0-3000L/h dosing volume processing, mechanically driven diaphragm, can transmit high-viscosity media, corrosive liquids and dangerous chemicals, and flow regulation can adjust the stroke length or motor frequency.

wps3

High Pressure Diaphragm Metering Dosing Pump with PVC Pump Head for Acid

Flow range:1~3600L/H

Highest pressure:1.0MPa

Voltage :380/220 Volt 50 Hz

Capacity: 1480 m3/H)

Max operating temperature:100°C

The pumps used for hydrogen peroxide are also different according to the types of chemical pumps used in different industrial and mining industries. Hebang has rich experience in hydrogen peroxide projects, and can quickly provide you with the most suitable pump type according to different industrial and mining industries. Welcome to consul for free.